(877) 828-9280

Yealink: Manual Configuration

< 1 min read

Obtain SIP Credentials

  1. Using any web browser log in to the Manager Portal
  2.  Click on Users at the top></li> <li>Find your extension number. At the far right click on the <strong>pencil</strong>, and then <strong>Phones</strong><img decoding=Find Yealink Phone IP Address
    1. From the Yealink phone select Menu
    2. Select Status
    3. Select Network
    4. Select IPv4 Status
    5. Take note of the IP address for the next steps

    Configure Yealink Phone

    1. Using any web browser navigate to the IP address from the above step
    2. Log in. The default credentials are admin / admin></li> <li>Click on Account at the top<img decoding=
    3. Line Active: Set to Enabled
    4. Label: Can be any descriptive name. Usually it’s the extension number. This will show on the phone’s LCD.
    5. Display Name: Can be any descriptive name. Will not show anywhere.
    6. Register Name: Username from PBX Portal
    7. User Name: Username from PBX Portal
    8. Password: Password from PBX Portal
    9. Enable Outbound Proxy Server: Enabled
    10. Outbound Proxy Server: sbc.ucaasnetwork.com:0
    11. Transport: UDP
    12. SIP Server 1
      • Server Host: Domain/Proxy from PBX Portal
    13. Click Confirm
    14. The page will refresh. Look at the top under Register Status. It should now say Registered></li> </ol> <h1 class=Configure Additional Settings
      1. Click on Account at the top></li> <li>Click on <strong>Advanced </strong>on the left<img decoding=
      2. Subscribe for MWI: Enabled
      3. Subscribe MWI to Voice Mail: Enabled
      4. Voice Mail: 5001
      5. Click Confirm></li> </ul> </li> <li>Click on <strong>Features</strong> at the top<img decoding=
        Updated on January 30, 2026

What are your feelings

  • Happy
  • Normal
  • Sad